الـجـروب الـرسـمى لـلـمـنـتـدى FaceBook | Official Group

**Fl2s.com** · 18-02-2015, 06:59 PM

دلوقتى انا ضفت reset skill scroll لاقتها من غير صوره no image وكمان بضربا مش بتنزل اى skill

كدا فى ايه غلط

**Hamza FiGo** · 18-02-2015, 07:06 PM

No Image من االايكون غير الايكونا لاي ايكونة علي مزاجك

وحكاية مش بتنزل حاجة. دي من البروسيدر . ظبطها صح علشان تشتغل معاك

**Fl2s.com** · 18-02-2015, 07:09 PM

اقتباس:

المشاركة الأصلية كتبت بواسطة Hamza FiGo عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ]

No Image من االايكون غير الايكونا لاي ايكونة علي مزاجك

وحكاية مش بتنزل حاجة. دي من البروسيدر . ظبطها صح علشان تشتغل معاك

علشان انا لسه مبتدى دلوقتى هبعتلك البروسيدر وشوفو صح ولا لا !

**Fl2s.com** · 18-02-2015, 07:10 PM

if(@JobID= 41816)
begin
declare @TotalSP int
declare @TotalSPMastery int
SELECT @TotalSP = SUM(_RefSkill.ReqLearn_SP) FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= 110
SELECT @TotalSPMastery = SUM(_RefLevel.Exp_M) FROM _CharSkillMastery, _RefLevel WHERE _RefLevel.Lvl=_CharSkillMastery.Level AND _CharSkillMastery.CharID=@CharID AND _CharSkillMastery.Level <= 110
UPDATE _Char SET RemainSkillPoint=RemainSkillPoint+@TotalSP+@TotalS PMastery+200000 WHERE CharID=@CharID
DELETE _CharSkill FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= 110 AND _RefSkill.ID NOT IN (1,70,40,2,8421,9354,9355,11162,9944,8419,8420,115 26,10625)
UPDATE _CharSkillMastery SET Level=0 WHERE CharID=@CharID AND Level <= 110
end

**Hamza FiGo** · 18-02-2015, 07:19 PM

البروسيدر كلها يا باشا هاتها. وحطها في CODE علشان تبقي مترتبة ونعرف نشوفه. الــ CODE اللي هو علامة الــ#

**Fl2s.com** · 18-02-2015, 07:23 PM

USE [SRO_VT_SHARD]
GO
/****** Object: StoredProcedure [dbo].[_AddTimedJob] Script Date: 02/18/2015 18:22:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[_AddTimedJob]
@CharID int,
@Category tinyint,
@JobID int,
@TimeToKeep int,
@Data1 int,
@Data2 int,
--##begin due to develop composite item
@Data3 int,
@Data4 int,
@Data5 int,
@Data6 int,
@Data7 int,
@Data8 int,
@Serial64 bigint,
@JID int
--##end due to develop composite item
as
if (not exists (select CharID from _Char with (nolock) where CharID = @CharID))
return -1
if (@TimeToKeep <= 0)
return -2
declare @NewJobID int
set @NewJobID = 0
--##JobID 1 = Guild // JobID 2 = Thief/Hunter/Trader
--##If you want to only have one not both, then just modify the line below!
--if (@JobID = 1 and @Category = 2 and @Serial64=0) or (@JobID = 2 and @Category = 2 and @Serial64=0) --For Guild and CharJob
if (@JobID = 1 and @Category = 2 and @Serial64=0) --Only for Guild
BEGIN
set @CharID = 0
insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,D ata2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64, JID)
values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)

END
ELSE
BEGIN
--##begin due to develop composite item
insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,D ata2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64, JID)
values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
END
--##end due to develop composite item
set @NewJobID = @@identity
if (@@error <> 0 or @@rowcount = 0)

return -3
return @NewJobID
-------------------------------------------------------------------------------------------------
if(@JobID= 41816) -- remove skills
begin
declare @TotalSP int
declare @TotalSPMastery int
SELECT @TotalSP = SUM(_RefSkill.ReqLearn_SP) FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= 110
SELECT @TotalSPMastery = SUM(_RefLevel.Exp_M) FROM _CharSkillMastery, _RefLevel WHERE _RefLevel.Lvl=_CharSkillMastery.Level AND _CharSkillMastery.CharID=@CharID AND _CharSkillMastery.Level <= 110
UPDATE _Char SET RemainSkillPoint=RemainSkillPoint+@TotalSP+@TotalS PMastery+200000 WHERE CharID=@CharID
DELETE _CharSkill FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= 110 AND _RefSkill.ID NOT IN (1,70,40,2,8421,9354,9355,11162,9944,8419,8420,115 26,10625)
UPDATE _CharSkillMastery SET Level=0 WHERE CharID=@CharID AND Level <= 110
end

حطها عندك فى text !

**Hamza FiGo** · 18-02-2015, 07:35 PM

حضرتك ضايفة غلط. المفروض يبقي بالشكل دا

كود:

USE [SRO_VT_SHARD]
GO
/****** Object:  StoredProcedure [dbo].[_AddTimedJob]    Script Date: 18/02/2015 06:33:14 م ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER   procedure [dbo].[_AddTimedJob]
@CharID            int,
@Category        tinyint,
@JobID            int,
@TimeToKeep    int,
@Data1            int,
@Data2            int,
--##begin due to develop composite item
@Data3            int,
@Data4            int,
@Data5            int,
@Data6            int,
@Data7            int,
@Data8            int,
@Serial64        bigint,
@JID            int
--##end due to develop composite item
as
        if(@JobID= '41816')
		begin 
			declare @TotalSP int 
			declare @TotalSPMastery int 
			SELECT @TotalSP = SUM(_RefSkill.ReqLearn_SP) FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= '130'
			SELECT @TotalSPMastery = SUM(_RefLevel.Exp_M) FROM _CharSkillMastery, _RefLevel WHERE _RefLevel.Lvl=_CharSkillMastery.Level AND _CharSkillMastery.CharID=@CharID AND _CharSkillMastery.Level <= '130' 
			UPDATE _Char SET RemainSkillPoint=RemainSkillPoint+@TotalSP+@TotalSPMastery+200000 WHERE CharID=@CharID 
			DELETE _CharSkill FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= '130' AND _RefSkill.ID NOT IN (1,70,40,2,8421,9354,9355,11162,9944,8419,8420,11526,10625) 
			UPDATE _CharSkillMastery SET Level='0' WHERE CharID=@CharID AND Level <= '130' 
		end  
		  	if (not exists (select CharID from _Char with (nolock) where CharID = @CharID))
                return -1
            if (@TimeToKeep <= 0)
                return -2
            declare @NewJobID int
            set @NewJobID = 0
            --##JobID 1 = Guild // JobID 2 = Thief/Hunter/Trader
            --##If you want to only have one not both, then just modify the line below!
            --if (@JobID = 1 and @Category = 2 and @Serial64=0) or (@JobID = 2 and @Category = 2 and @Serial64=0)  --For Guild and CharJob            
     if (@JobID = 1 and @Category = 2 and @Serial64=0)   --Only for Guild
            BEGIN
            set @CharID = 0            
            insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,Data2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64,JID)
            values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
            
            END
            ELSE
            BEGIN
            --##begin due to develop composite item
            insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,Data2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64,JID)
            values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
            END
            --##end due to develop composite item
            set @NewJobID = @@identity
            if (@@error <> 0 or @@rowcount = 0)
                
                return -3
     return @NewJobID  
--????

**™MaR™** · 18-02-2015, 10:04 PM

حضرتك ضفها في كود عشان نعرف نشوف الكود صح . بعد ازنك

**Fl2s.com** · 19-02-2015, 12:22 AM

اقتباس:

المشاركة الأصلية كتبت بواسطة Hamza FiGo عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ]

حضرتك ضايفة غلط. المفروض يبقي بالشكل دا

كود:

USE [SRO_VT_SHARD]
GO
/****** Object:  StoredProcedure [dbo].[_AddTimedJob]    Script Date: 18/02/2015 06:33:14 م ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER   procedure [dbo].[_AddTimedJob]
@CharID            int,
@Category        tinyint,
@JobID            int,
@TimeToKeep    int,
@Data1            int,
@Data2            int,
--##begin due to develop composite item
@Data3            int,
@Data4            int,
@Data5            int,
@Data6            int,
@Data7            int,
@Data8            int,
@Serial64        bigint,
@JID            int
--##end due to develop composite item
as
        if(@JobID= '41816')
		begin 
			declare @TotalSP int 
			declare @TotalSPMastery int 
			SELECT @TotalSP = SUM(_RefSkill.ReqLearn_SP) FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= '130'
			SELECT @TotalSPMastery = SUM(_RefLevel.Exp_M) FROM _CharSkillMastery, _RefLevel WHERE _RefLevel.Lvl=_CharSkillMastery.Level AND _CharSkillMastery.CharID=@CharID AND _CharSkillMastery.Level <= '130' 
			UPDATE _Char SET RemainSkillPoint=RemainSkillPoint+@TotalSP+@TotalSPMastery+200000 WHERE CharID=@CharID 
			DELETE _CharSkill FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= '130' AND _RefSkill.ID NOT IN (1,70,40,2,8421,9354,9355,11162,9944,8419,8420,11526,10625) 
			UPDATE _CharSkillMastery SET Level='0' WHERE CharID=@CharID AND Level <= '130' 
		end  
		  	if (not exists (select CharID from _Char with (nolock) where CharID = @CharID))
                return -1
            if (@TimeToKeep <= 0)
                return -2
            declare @NewJobID int
            set @NewJobID = 0
            --##JobID 1 = Guild // JobID 2 = Thief/Hunter/Trader
            --##If you want to only have one not both, then just modify the line below!
            --if (@JobID = 1 and @Category = 2 and @Serial64=0) or (@JobID = 2 and @Category = 2 and @Serial64=0)  --For Guild and CharJob            
     if (@JobID = 1 and @Category = 2 and @Serial64=0)   --Only for Guild
            BEGIN
            set @CharID = 0            
            insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,Data2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64,JID)
            values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
            
            END
            ELSE
            BEGIN
            --##begin due to develop composite item
            insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,Data2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64,JID)
            values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
            END
            --##end due to develop composite item
            set @NewJobID = @@identity
            if (@@error <> 0 or @@rowcount = 0)
                
                return -3
     return @NewJobID  
--????

انا ختو كوبى وحطيتو وبردو مافيش skill بتزل !!

**Hamza FiGo** · 19-02-2015, 12:32 AM

يبقي حضرتك ضايف الاسكرول غلط . الاسكرول مجربة من ناس كتير وشغالة تمام

امشي تاني ورا اللاينز

**Dev Toxido** · 19-02-2015, 01:18 AM

المواضيع المتشابهه
الموضوع	كاتب الموضوع	المنتدى	الردود	آخر مشاركة
مطلوب Reset Stats Scroll	testmis	قسم الاسئلة و الاستفسارات لعمل السيرفرات الخاصة	11	21-03-2018 03:06 PM
add skill & state reset scroll	SAGY	قسم الاسئلة و الاستفسارات لعمل السيرفرات الخاصة	6	22-05-2017 03:27 AM
Skill reset scroll	™XerK™	قسم الاسئلة و الاستفسارات لعمل السيرفرات الخاصة	5	08-09-2014 08:51 PM

يتصفح الموضوع حالياً : 2 (0 عضو و 2 زائر)

	حفظ بياناتي ؟