الـجـروب الـرسـمى لـلـمـنـتـدى FaceBook | Official Group

**Fl2s.com** · 18-02-2015, 06:59 PM

دلوقتى انا ضفت reset skill scroll لاقتها من غير صوره no image وكمان بضربا مش بتنزل اى skill

كدا فى ايه غلط

**Hamza FiGo** · 18-02-2015, 07:06 PM

No Image من االايكون غير الايكونا لاي ايكونة علي مزاجك

وحكاية مش بتنزل حاجة. دي من البروسيدر . ظبطها صح علشان تشتغل معاك

**Fl2s.com** · 18-02-2015, 07:09 PM

اقتباس:

المشاركة الأصلية كتبت بواسطة Hamza FiGo عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ]

No Image من االايكون غير الايكونا لاي ايكونة علي مزاجك

وحكاية مش بتنزل حاجة. دي من البروسيدر . ظبطها صح علشان تشتغل معاك

علشان انا لسه مبتدى دلوقتى هبعتلك البروسيدر وشوفو صح ولا لا !

**Fl2s.com** · 18-02-2015, 07:10 PM

if(@JobID= 41816)
begin
declare @TotalSP int
declare @TotalSPMastery int
SELECT @TotalSP = SUM(_RefSkill.ReqLearn_SP) FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= 110
SELECT @TotalSPMastery = SUM(_RefLevel.Exp_M) FROM _CharSkillMastery, _RefLevel WHERE _RefLevel.Lvl=_CharSkillMastery.Level AND _CharSkillMastery.CharID=@CharID AND _CharSkillMastery.Level <= 110
UPDATE _Char SET RemainSkillPoint=RemainSkillPoint+@TotalSP+@TotalS PMastery+200000 WHERE CharID=@CharID
DELETE _CharSkill FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= 110 AND _RefSkill.ID NOT IN (1,70,40,2,8421,9354,9355,11162,9944,8419,8420,115 26,10625)
UPDATE _CharSkillMastery SET Level=0 WHERE CharID=@CharID AND Level <= 110
end

**Hamza FiGo** · 18-02-2015, 07:19 PM

البروسيدر كلها يا باشا هاتها. وحطها في CODE علشان تبقي مترتبة ونعرف نشوفه. الــ CODE اللي هو علامة الــ#

**Fl2s.com** · 18-02-2015, 07:23 PM

USE [SRO_VT_SHARD]
GO
/****** Object: StoredProcedure [dbo].[_AddTimedJob] Script Date: 02/18/2015 18:22:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[_AddTimedJob]
@CharID int,
@Category tinyint,
@JobID int,
@TimeToKeep int,
@Data1 int,
@Data2 int,
--##begin due to develop composite item
@Data3 int,
@Data4 int,
@Data5 int,
@Data6 int,
@Data7 int,
@Data8 int,
@Serial64 bigint,
@JID int
--##end due to develop composite item
as
if (not exists (select CharID from _Char with (nolock) where CharID = @CharID))
return -1
if (@TimeToKeep <= 0)
return -2
declare @NewJobID int
set @NewJobID = 0
--##JobID 1 = Guild // JobID 2 = Thief/Hunter/Trader
--##If you want to only have one not both, then just modify the line below!
--if (@JobID = 1 and @Category = 2 and @Serial64=0) or (@JobID = 2 and @Category = 2 and @Serial64=0) --For Guild and CharJob
if (@JobID = 1 and @Category = 2 and @Serial64=0) --Only for Guild
BEGIN
set @CharID = 0
insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,D ata2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64, JID)
values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)

END
ELSE
BEGIN
--##begin due to develop composite item
insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,D ata2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64, JID)
values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
END
--##end due to develop composite item
set @NewJobID = @@identity
if (@@error <> 0 or @@rowcount = 0)

return -3
return @NewJobID
-------------------------------------------------------------------------------------------------
if(@JobID= 41816) -- remove skills
begin
declare @TotalSP int
declare @TotalSPMastery int
SELECT @TotalSP = SUM(_RefSkill.ReqLearn_SP) FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= 110
SELECT @TotalSPMastery = SUM(_RefLevel.Exp_M) FROM _CharSkillMastery, _RefLevel WHERE _RefLevel.Lvl=_CharSkillMastery.Level AND _CharSkillMastery.CharID=@CharID AND _CharSkillMastery.Level <= 110
UPDATE _Char SET RemainSkillPoint=RemainSkillPoint+@TotalSP+@TotalS PMastery+200000 WHERE CharID=@CharID
DELETE _CharSkill FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= 110 AND _RefSkill.ID NOT IN (1,70,40,2,8421,9354,9355,11162,9944,8419,8420,115 26,10625)
UPDATE _CharSkillMastery SET Level=0 WHERE CharID=@CharID AND Level <= 110
end

حطها عندك فى text !

**Hamza FiGo** · 18-02-2015, 07:35 PM

حضرتك ضايفة غلط. المفروض يبقي بالشكل دا

كود:

USE [SRO_VT_SHARD]
GO
/****** Object:  StoredProcedure [dbo].[_AddTimedJob]    Script Date: 18/02/2015 06:33:14 م ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER   procedure [dbo].[_AddTimedJob]
@CharID            int,
@Category        tinyint,
@JobID            int,
@TimeToKeep    int,
@Data1            int,
@Data2            int,
--##begin due to develop composite item
@Data3            int,
@Data4            int,
@Data5            int,
@Data6            int,
@Data7            int,
@Data8            int,
@Serial64        bigint,
@JID            int
--##end due to develop composite item
as
        if(@JobID= '41816')
		begin 
			declare @TotalSP int 
			declare @TotalSPMastery int 
			SELECT @TotalSP = SUM(_RefSkill.ReqLearn_SP) FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= '130'
			SELECT @TotalSPMastery = SUM(_RefLevel.Exp_M) FROM _CharSkillMastery, _RefLevel WHERE _RefLevel.Lvl=_CharSkillMastery.Level AND _CharSkillMastery.CharID=@CharID AND _CharSkillMastery.Level <= '130' 
			UPDATE _Char SET RemainSkillPoint=RemainSkillPoint+@TotalSP+@TotalSPMastery+200000 WHERE CharID=@CharID 
			DELETE _CharSkill FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= '130' AND _RefSkill.ID NOT IN (1,70,40,2,8421,9354,9355,11162,9944,8419,8420,11526,10625) 
			UPDATE _CharSkillMastery SET Level='0' WHERE CharID=@CharID AND Level <= '130' 
		end  
		  	if (not exists (select CharID from _Char with (nolock) where CharID = @CharID))
                return -1
            if (@TimeToKeep <= 0)
                return -2
            declare @NewJobID int
            set @NewJobID = 0
            --##JobID 1 = Guild // JobID 2 = Thief/Hunter/Trader
            --##If you want to only have one not both, then just modify the line below!
            --if (@JobID = 1 and @Category = 2 and @Serial64=0) or (@JobID = 2 and @Category = 2 and @Serial64=0)  --For Guild and CharJob            
     if (@JobID = 1 and @Category = 2 and @Serial64=0)   --Only for Guild
            BEGIN
            set @CharID = 0            
            insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,Data2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64,JID)
            values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
            
            END
            ELSE
            BEGIN
            --##begin due to develop composite item
            insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,Data2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64,JID)
            values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
            END
            --##end due to develop composite item
            set @NewJobID = @@identity
            if (@@error <> 0 or @@rowcount = 0)
                
                return -3
     return @NewJobID  
--????

**™MaR™** · 18-02-2015, 10:04 PM

حضرتك ضفها في كود عشان نعرف نشوف الكود صح . بعد ازنك

**Fl2s.com** · 19-02-2015, 12:22 AM

اقتباس:

المشاركة الأصلية كتبت بواسطة Hamza FiGo عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ]

حضرتك ضايفة غلط. المفروض يبقي بالشكل دا

كود:

USE [SRO_VT_SHARD]
GO
/****** Object:  StoredProcedure [dbo].[_AddTimedJob]    Script Date: 18/02/2015 06:33:14 م ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER   procedure [dbo].[_AddTimedJob]
@CharID            int,
@Category        tinyint,
@JobID            int,
@TimeToKeep    int,
@Data1            int,
@Data2            int,
--##begin due to develop composite item
@Data3            int,
@Data4            int,
@Data5            int,
@Data6            int,
@Data7            int,
@Data8            int,
@Serial64        bigint,
@JID            int
--##end due to develop composite item
as
        if(@JobID= '41816')
		begin 
			declare @TotalSP int 
			declare @TotalSPMastery int 
			SELECT @TotalSP = SUM(_RefSkill.ReqLearn_SP) FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= '130'
			SELECT @TotalSPMastery = SUM(_RefLevel.Exp_M) FROM _CharSkillMastery, _RefLevel WHERE _RefLevel.Lvl=_CharSkillMastery.Level AND _CharSkillMastery.CharID=@CharID AND _CharSkillMastery.Level <= '130' 
			UPDATE _Char SET RemainSkillPoint=RemainSkillPoint+@TotalSP+@TotalSPMastery+200000 WHERE CharID=@CharID 
			DELETE _CharSkill FROM _RefSkill, _CharSkill WHERE _RefSkill.ID=_CharSkill.SkillID AND _CharSkill.CharID=@CharID AND _RefSkill.ReqCommon_MasteryLevel1 <= '130' AND _RefSkill.ID NOT IN (1,70,40,2,8421,9354,9355,11162,9944,8419,8420,11526,10625) 
			UPDATE _CharSkillMastery SET Level='0' WHERE CharID=@CharID AND Level <= '130' 
		end  
		  	if (not exists (select CharID from _Char with (nolock) where CharID = @CharID))
                return -1
            if (@TimeToKeep <= 0)
                return -2
            declare @NewJobID int
            set @NewJobID = 0
            --##JobID 1 = Guild // JobID 2 = Thief/Hunter/Trader
            --##If you want to only have one not both, then just modify the line below!
            --if (@JobID = 1 and @Category = 2 and @Serial64=0) or (@JobID = 2 and @Category = 2 and @Serial64=0)  --For Guild and CharJob            
     if (@JobID = 1 and @Category = 2 and @Serial64=0)   --Only for Guild
            BEGIN
            set @CharID = 0            
            insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,Data2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64,JID)
            values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
            
            END
            ELSE
            BEGIN
            --##begin due to develop composite item
            insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,Data2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64,JID)
            values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
            END
            --##end due to develop composite item
            set @NewJobID = @@identity
            if (@@error <> 0 or @@rowcount = 0)
                
                return -3
     return @NewJobID  
--????

انا ختو كوبى وحطيتو وبردو مافيش skill بتزل !!

**Hamza FiGo** · 19-02-2015, 12:32 AM

يبقي حضرتك ضايف الاسكرول غلط . الاسكرول مجربة من ناس كتير وشغالة تمام

امشي تاني ورا اللاينز

**Dev Toxido** · 19-02-2015, 01:18 AM

أدوات الموضوع
مشاهدة صفحة طباعة الموضوع أرسل هذا الموضوع إلى صديق
انواع عرض الموضوع
العرض العادي الانتقال إلى العرض المتطور الانتقال إلى العرض الشجري

المواضيع المتشابهه
الموضوع	كاتب الموضوع	المنتدى	الردود	آخر مشاركة
مطلوب Reset Stats Scroll	testmis	قسم الاسئلة و الاستفسارات لعمل السيرفرات الخاصة	11	21-03-2018 03:06 PM
add skill & state reset scroll	SAGY	قسم الاسئلة و الاستفسارات لعمل السيرفرات الخاصة	6	22-05-2017 03:27 AM
Skill reset scroll	™XerK™	قسم الاسئلة و الاستفسارات لعمل السيرفرات الخاصة	5	08-09-2014 08:51 PM

يتصفح الموضوع حالياً : 1 (0 عضو و 1 زائر)

	حفظ بياناتي ؟