السلام عليكم ورحمة الله وبركاته
اخوانى الاعزاء محبى Silkroad , وجدت العديد من الاعضاء بل جميعهم يشتكون من مشكلة الدخول للعبة
بعد هذا التحديث والحمد لله وجدت الحل الأكيد بإذن الله هو كل اللى عاوزه هدوء وصبر ودعوة ليا علشان
علشان انجح يارب .....
نبدا بإسم الله الرحمن الرحيم
--------------------------------------------------------------------------------------------------
اسم البرنامج : LogSro
المصمم : Hussert
وظيفة البرنامج : يقوم بفتح برنامج Server list ويقوم بحساب الاماكن الخالية فى السيرفر و الدخول
روابط البرنامج (عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا
[ للتسجيل اضغط هنا ]) :
>>>
عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ] <<<-----------------------------------------------------------------------------------------------
الحمدلله انتهينا من تعريف البرنامج والروابط
نيجى للشرح >>>>>>>>
ديه طبعا صورة البرنامج
طريقة العمل والتشيل
1- فك ضغط البرنامج داخل فولدر اللعبة , تمام !!
2- شغل اللعبة عادى جدا واختار السيرفر واكتب الاكونت والباسورد , تمام !!
3-افتح البرنامج اللى اسمه LogSro v2.1 ,تمام!!
4-اختار اسم السيرفر من القايمة وعلم على علام Auto فى برنامج Server list
ولازم تكون Min. Free Slot
2 هااام جدا علشان تدخل من اول مرة بدون مشاكل
5- المهم دلوقتى علشان نكون منظمين احنا فاتحين Silkroad والبرنامج , تمام!!
6-نقول بسم الله وندوس على Start البرنامج هيبدأ يشتغل واول ما هيكون فى Free Slot 2 هيعمل
Login علطول وبدون اى مشاكل والشخصية موجودة وكله تمام والحمدلله وانا مجربه 00%
---------------------------------------------------------------------------------------------------
اتمنى من الله ان يكون الشرح وافى لأنها تالت مرة اكتب الموضوع لأنه حصل خطأ فى المنتدى
ملاحظة بخصوصى : انا كانت مشكلتى فى اللعبة صعبة جدا اولا معرفش
اى بيلد كويس ولا عارف اجيب جولد ولا لاقى تاكسى وكنت عامل مليون شخصية كل ما اعرف ان حد
هيلفلنى Free اعمل اكاونت فى السيرفر بتاعه واخر لفل اوصله 13 وكانت مصيبة لما اللعبة مرضتش
تشتغل
لكن الحمد لله مع البرنامج كله بقى تمام عرفت ادخل اللعبة فاضل انى محتاج اعرف بيلد كويس وانا
اختارت Wizard +Clirc
انا لحد دلوقتى عامل فارم لحد لفل 15 مزود 14 لفل int ولفل واحد str غلطة وعملتها
محتاج اعرف ايه هى السكيلات المطلوبة انا معايا 5000 sp مستنى مساعدتكم ليا واى حد عاوز يلفل
فى السيرفر الخاص Ecsro Free انا موجود
كل اللى انا اتمناه منكم دعوة علشان النتيجة لحسن انا مرعوب ومش هنسى الحلاوة XD
احب اختم ببعض الاسئلة المقتبسة من المنتدى بالنص
اقتباس:
F.A.Q.
(Read it Before asking!)
- Last time updated: 22/3/2009 -
[1] I found a Trojan/virus in the Sro Server list!
The sro server list is made by rumata. Yes, the same guy who made the mostly used loader, [Mod]Testosterone (C19H28O2).
About the scan results, they are just not true (false positives due to the way the program is coded).
Thanx to martas for this logical answer!
[2] My Anti-virus is blocking (or deleting) the Server list!
If you Anti-virus is blocking/deleteing it, then see if you can enlist the server list in your anti-virus "trusted programs" list. (Somewhere in the option, but not all anti-viruses has it). If you have no other choice to turn it off temporarliy enough to use the server list every time you want to use it OR try and find another anti-viurs that have a "trusted programs" list. (Do not ask me which one has it.... just search)
[3] I found a Trojan/virus in LogSro itself!
This is LogSro.exe ALONE scan: LogSro_v2.1.exe Result: 4/39 (10.26%)
You must have scanned the whole package which contains the sro server list. Your scan must have detected the server list as a threat.
See [1] & [2] for more details about the server list scan result issue.
Thanx to martas for noticing this issue
[4] "I dont have permission to access this file". I always have that error message when I try to open the Serverlist.
Right click on the Serverlist file > Run as > Admin
.
[5] What loader or/and bot can Logsro work with ?
Any Loader or bot can be used along with Logsro.
As long as the name of the sro window remains as "SRO_Client" just while trying to login.
However, If it's agbot then you must not patch with agbot media patcher. Instead, you should use testosterone's (a loader) redirect ip.
Check [7] for more details.
[6] I can't extract this "Sro Server List" from the zipped package.
/ Where is this "Sro Server List"? I've extract the package and I didn't see it.
The server list is there in the package already. Your anti-virus (or firewall sometimes) is deleting it the moment you extract it out. Just disable your anti-virus temporarily enough to extract it.
There is a chance that the anti-virus will delete it once turn it ON back again. As a result, you might need to use another anti-virus.
See [1] & [2] for more details about the server list scan result issue.
.
[7] Sro Server List: "Disconnected from Server". It's like that no matter how many times I press the "Refresh" button there.
First, just try to press the "Refresh" button 2 or 3 times and see if it works.
If not, then you must have patched your media.pk2 with agbot media patcher. If you did, then unpatch using the same patcher on it again. You must use testosterone's "Redirect ip" function instead of patching. (Just tick the redirect ip box in testosterone when you want to use agbot, then press launch sro through testosterone to get started)
See Testosterone thread for more info about it:
[Mod]Testosterone (C19H28O2)
.
[8] Does LogSro work with agbot?
Yes, it does. However, you must not patch with agbot media patcher as it affects the sro server list. Instead Use testosterone's (a loader) redirect ip.
See [7] for more details.
[9] When I open server list I get an error "k2:Reader: Cant open file C;Program FilesSilkroadmedia.pk2, error = 3" and when I press ok it enters me in the list.Why?
I had that Error before... I dont know why its an error even because it get you back to the list normally .. to get rid of that error , put the server list Files ( Ithink there only two ) in the same folder of Silkroad.
.
[10]What resolution are compatible with this script?
Supports all resolution as well as window mode.
.
[11] when I start the script, the server list and Logsro program must be in front of the silkroad window?
Not necessary. You can even do other stuff while LogSro tries to login. Just make sure you do not interrupt logsro pressing anywhere inside LogSro window. It would then stops it.
.
[12]Sometimes, When I press "Start" in LogSro it stops then immediately after LogSro says "Waiting for 1.5 sec...". Why does that happen?
Yeah, It happens to me too. It's a bug in the loop of LogSro. It only happens sometimes, so just press start again and it will work. After starting, you will notice that would stop when you press anywhere inside logsro window. Not just when pressing stop.
.
[13] Is there any possibility of getting Ban!?
Nope.
LogSro is only a macro that presses the confirm button , using the Sro server list , at the right time.
.
[14]It needs , if possible , an image verification writer , so if it didn't login , it'll retry again Automatically.
I'm trying to figure it out.
.
[15]If theres a way to make the server list built into the program? if so i think it would solve that d/c problem and the thing that happens when it wont start.
I'm working making my own server list.
.
[16]I don't understand... why can I not login when there are 3 free slots available ?
Its just because of traffic. In other words, 3 Persons pressed confirm at that time before you.
.
[17] I'm using McAfee and it refuses to let me open server list.
Right click on the Mcafee icon (right under of youre screen)
Click on Virusscan-console
the first and the second thing must be off
in Dutch (toegangsbeveiliging en bufferoverloop beveiliging)
Normaly then it must work ^^
Thanx to KillahIf still no good, then just use another anti-virus. (again, don't ask me which one to use)
|
وياريت متنسوش اهم حاجة
دعواتكم ليا بالنجاح
05-06-2009, 09:40 PM
المواضيع المتشابهه
العرض الشجري