حد يساعدنى فى ال Add Unique

[Ahmed Moon]

انا بستخدم ال Quer دى

USE SRO_VT_SHARD /* Add Unique Spot By Marwan Abbas */

DECLARE @UNIQUE VARCHAR (129)
DECLARE @CHARNAME VARCHAR (64)
DECLARE @mindealy INT
DECLARE @maxdelay int
DECLARE @INITRADIUS INT
DECLARE @RADIUS int
DECLARE @MAXNEST int = (SELECT MAX (dwNestID) FROM Tab_RefNest)+1
DECLARE @MAXHIVE int = (SELECT MAX (dwHiveID) FROM Tab_RefHive)+1
DECLARE @MAXTACTICS int = (SELECT MAX (dwTacticsID) FROM Tab_RefTactics)+1

/* put your settings here */
SET @UNIQUE = 'MOB_JUPITER_YUNO' -- Unique code name from _RefobjCommon table
SET @CHARNAME = 'CHARNAME' -- Character name from _Char table to get mob position X Y Z
SET @mindealy = 60 -- Minimum time before appears in seconds
SET @maxdelay = 120 -- Maximum time before appears in seconds
SET @INITRADIUS = 100 -- Radius around spot unique can generated at
SET @RADIUS = 500 -- Radius around spot Unique can move in
/* end of settings area */

/* get ID of mob by code name */
Declare @MOBID int SET @MOBID = (SELECT ID FROM _RefObjCommon WHERE CodeName128 = @UNIQUE)

SET IDENTITY_INSERT Tab_RefTactics ON
INSERT INTO Tab_RefTactics (dwTacticsID,dwObjID,btAIQoS,nMaxStamina,btMaxStam inaVariance,nSightRange,btAggressType,AggressData, btChangeTarget,btHelpRequestTo,btHelpResponseTo,bt BattleStyle,BattleStyleData,btDiversionBasis,Diver sionBasisData1,DiversionBasisData2,DiversionBasisD ata3,DiversionBasisData4,DiversionBasisData5,Diver sionBasisData6,DiversionBasisData7,DiversionBasisD ata8,btDiversionKeepBasis,DiversionKeepBasisData1, DiversionKeepBasisData2,DiversionKeepBasisData3,Di versionKeepBasisData4,DiversionKeepBasisData5,Dive rsionKeepBasisData6,DiversionKeepBasisData7,Divers ionKeepBasisData8,btKeepDistance,KeepDistanceData, btTraceType,btTraceBoundary,TraceData,btHomingType ,HomingData,btAggressTypeOnHoming,btFleeType,dwCha mpionTacticsID,AdditionOptionFlag,szDescString128) VALUES
(@MAXTACTICS,@MOBID,0,500,50,200,0,0,2,2,2,0,0,5,0 ,0,0,0,0,30,0,0,4,0,0,0,0,0,0,0,0,0,0,0,1,500,0,0, 2,0,0,112,@UNIQUE)
SET IDENTITY_INSERT Tab_RefTactics OFF

SET IDENTITY_INSERT Tab_RefHive ON
INSERT INTO Tab_RefHive (dwHiveID,btKeepMonsterCountType,dwOverwriteMaxTot alCount,fMonsterCountPerPC,dwSpawnSpeedIncreaseRat e,dwMaxIncreaseRate,btFlag,GameWorldID,HatchObjTyp e,szDescString128) VALUES
(@MAXHIVE,0,1,0,0,0,0,1,1,@UNIQUE)
SET IDENTITY_INSERT Tab_RefHive OFF

/* get position coordinates of your character */

DECLARE @REGION INT SET @REGION = (SELECT (LatestRegion) FROM _Char WHERE CharName16 = @CHARNAME)
DECLARE @POSX INT SET @POSX = (SELECT (POSX) FROM _Char WHERE CharName16 = @CHARNAME)
DECLARE @POSY INT SET @POSY = (SELECT (POSY) FROM _Char WHERE CharName16 = @CHARNAME)
DECLARE @POSZ INT SET @POSZ = (SELECT (POSZ) FROM _Char WHERE CharName16 = @CHARNAME)

SET IDENTITY_INSERT Tab_RefNest ON
INSERT INTO Tab_RefNest (dwNestID,dwHiveID,dwTacticsID,nRegionDBID,fLocalP osX,fLocalPosY,fLocalPosZ,wInitialDir,nRadius,nGen erateRadius,nChampionGenPercentage,dwDelayTimeMin, dwDelayTimeMax,dwMaxTotalCount,btFlag,btRespawn,bt Type) VALUES
(@MAXNEST,@MAXHIVE,@MAXTACTICS,@REGION,@POSX,@POSY ,@POSZ,0,@RADIUS,@INITRADIUS,0,@mindealy,@maxdelay ,1,0,1,0)
SET IDENTITY_INSERT Tab_RefNest OFF


print ''
print ''
print 'Done!'
/**Because query will not work as it with BR files due to the difference between tables so:

بعد ما بكتب اسم الChar وى اكتب كود ال Unique
بيجبلى كدا

[™MaR™]

جرب ده

USE SRO_VT_SHARD /* Add Unique Spot By MaR

DECLARE @UNIQUE VARCHAR (129) 
DECLARE @CHARNAME VARCHAR (64) 
DECLARE @mindealy INT 
DECLARE @maxdelay int 
DECLARE @INITRADIUS INT 
DECLARE @RADIUS int 
DECLARE @MAXNEST int = (SELECT MAX (dwNestID) FROM Tab_RefNest)+1 
DECLARE @MAXHIVE int = (SELECT MAX (dwHiveID) FROM Tab_RefHive)+1 
DECLARE @MAXTACTICS int = (SELECT MAX (dwTacticsID) FROM Tab_RefTactics)+1 

/* put your settings here */ 
SET @UNIQUE = 'MOB_JUPITER_ANGER_FANATICISM_CLONE' -- Unique code name from _RefobjCommon table 
SET @CHARNAME = 'SoulFighter' -- Character name from _Char table to get mob position X Y Z 
SET @mindealy = 3600  -- Minimum time before appears in seconds 
SET @maxdelay = 120  -- Maximum time before appears in seconds 
SET @INITRADIUS = 100  -- Radius around spot unique can generated at 
SET @RADIUS = 500  -- Radius around spot Unique can move in 
/* end of settings area */ 

/* get ID of mob by code name */ 
Declare @MOBID int SET @MOBID = (SELECT ID FROM _RefObjCommon WHERE CodeName128 = @UNIQUE) 

SET IDENTITY_INSERT Tab_RefTactics ON 
INSERT INTO Tab_RefTactics (dwTacticsID,dwObjID,btAIQoS,nMaxStamina,btMaxStaminaVariance,nSightRange,btAggressType,AggressData,btChangeTarget,btHelpRequestTo,btHelpResponseTo,btBattleStyle,BattleStyleData,btDiversionBasis,DiversionBasisData1,DiversionBasisData2,DiversionBasisData3,DiversionBasisData4,DiversionBasisData5,DiversionBasisData6,DiversionBasisData7,DiversionBasisData8,btDiversionKeepBasis,DiversionKeepBasisData1,DiversionKeepBasisData2,DiversionKeepBasisData3,DiversionKeepBasisData4,DiversionKeepBasisData5,DiversionKeepBasisData6,DiversionKeepBasisData7,DiversionKeepBasisData8,btKeepDistance,KeepDistanceData,btTraceType,btTraceBoundary,TraceData,btHomingType,HomingData,btAggressTypeOnHoming,btFleeType,dwChampionTacticsID,AdditionOptionFlag,szDescString128) VALUES 
(@MAXTACTICS,@MOBID,0,500,50,200,0,0,2,2,2,0,0,5,0,0,0,0,0,30,0,0,4,0,0,0,0,0,0,0,0,0,0,0,1,500,0,0,2,0,0,112,@UNIQUE) 
SET IDENTITY_INSERT Tab_RefTactics OFF 

SET IDENTITY_INSERT Tab_RefHive ON 
INSERT INTO Tab_RefHive (dwHiveID,btKeepMonsterCountType,dwOverwriteMaxTotalCount,fMonsterCountPerPC,dwSpawnSpeedIncreaseRate,dwMaxIncreaseRate,btFlag,GameWorldID,HatchObjType,szDescString128) VALUES 
(@MAXHIVE,0,1,0,0,0,0,1,1,@UNIQUE) 
SET IDENTITY_INSERT Tab_RefHive OFF 

/* get position coordinates of your character */ 

DECLARE @REGION INT SET @REGION = (SELECT (LatestRegion) FROM _Char WHERE CharName16 = @CHARNAME) 
DECLARE @POSX INT SET @POSX = (SELECT (POSX) FROM _Char WHERE CharName16 = @CHARNAME) 
DECLARE @POSY INT SET @POSY = (SELECT (POSY) FROM _Char WHERE CharName16 = @CHARNAME) 
DECLARE @POSZ INT SET @POSZ = (SELECT (POSZ) FROM _Char WHERE CharName16 = @CHARNAME) 

SET IDENTITY_INSERT Tab_RefNest ON 
INSERT INTO Tab_RefNest (dwNestID,dwHiveID,dwTacticsID,nRegionDBID,fLocalPosX,fLocalPosY,fLocalPosZ,wInitialDir,nRadius,nGenerateRadius,nChampionGenPercentage,dwDelayTimeMin,dwDelayTimeMax,dwMaxTotalCount,btFlag,btRespawn,btType) VALUES 
(@MAXNEST,@MAXHIVE,@MAXTACTICS,@REGION,@POSX,@POSY,@POSZ,0,@RADIUS,@INITRADIUS,0,@mindealy,@maxdelay,1,0,1,0) 
SET IDENTITY_INSERT Tab_RefNest OFF 


print '' 
print '' 
print 'Done!'

Then go to tables (Tab_RefNest and Tab_RefHive and Tab_RefTactics) Right click and choose Design


Then Right click on [dwTacticsID for tactics table , dwHiveID for hive table , dwNestID for nest table] and choose "set primary key"


Then scroll down at column properties you will find "Identity specification" property >> choose "is identity" and choose "yes" as you can see here

[Hero]

بص الحل فى الكلام اللى تحت دى
Then go to tables (Tab_RefNest and Tab_RefHive and Tab_RefTactics) Right click and choose Design


Then Right click on [dwTacticsID for tactics table , dwHiveID for hive table , dwNestID for nest table] and choose "set primary key"


Then scroll down at column properties you will find "Identity specification" property >> choose "is identity" and choose "yes" as you can see here

لو مش فاهم
قول و هحاول ابسطهالك اكتر عشان بس الصور مرفوعة و مش موجودة عندى

[Ahmed Moon]

انا لما علمت على dwTacticsID وى dwHiveID وى dwNestID
فاعملت الحاجة دى
Then scroll down at column properties you will find "Identity specification" property >> choose "is identity" and choose "yes" as you can see here
فااتلغت علمت الصح من dwNestID

[™Dev Microsoft™]

عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ]
عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ]

[Ahmed Moon]

فى مشكله مش حكاية Quer