مشاهدة النسخة كاملة : الحقونى أرجوا المساعدة مشكلة صعبة و خطيرة
tarek_Smart
25-05-2011, 02:36 AM
السلام عليكم أحبائى أنا بيجيلى الرسالة ديه Windows could not start because the following file is missing or corrupt :\windows\system32\config\system أنا عملت 11 مرة ويندز و غيرت النسخة أكثر من مرة و فكرت إنوا ممكن يكون فيرس إستخدمت لأحدث الطرق لإزالة أصعب الفيروسات و برضوا منفعش أرجوا المساعدة .. و شكرا
Alone iN The Sky
28-05-2011, 03:20 PM
بيقولك الويندوز مش هيقدر يكمل الفتح عشان فى ملف ناقص او موجود لكن فيه مشكلة
وده لازم تسطب نسخة تانية
وادام انت بتقول سطبت 11 نسخة ونفس المشكلة
فا ده كده حاجة من الاثنين
1- فيرس متخصص فى افساد الملف ده وطبعا لازم يتشال بانتى فيرس من دول
avira - avast - panda- nod32
وطبعا لازم يكون معمول ليهم تحديث بتاريخ اليوم
ودول افضل انواع بالعالم
يا اما العيب الثانى
2- فى برنامج عندك انت بتسطبه ومن خواص البرنامج انه بيستخدم الملف system عند تسطيب البرنامج .. والبرنامج بايظ فا اما بيحتاج ملف ال system بيبوظه هو كمان معاه فا الويندوز بيخرب
والحل هو انك ماتسطبش البرامج اللى كنت بتسطبها بعد كل ويندوز ونزل الحديث منها من النت من جديد وجرب
وان شاء الله تتحل
سلامووز
TrHell
30-05-2011, 10:30 PM
+1
™_BlackEagle_™
31-05-2011, 06:38 PM
اضافة .. يأما النسخة الي بتنزلها ناقصة وانت نزلتها 11 مرة فاجرب نسخة غيرها ^^
tarek_Smart
31-05-2011, 08:45 PM
السلام عليكم يا بلاك إيجيل أنا غيرت النسخة كتير و أستخدت أحدث الطرق لإزالة الفيروسات و غيرت النسخة مش عملت واحدة جديدة أنا جيبت أنواع تانية أرجوا المساعدة
adiloh
16-06-2011, 12:00 AM
بسم الله ارحمان الرحيم
http://www.troublefixers.com/wp-content/uploads/images/ErrormessageonstartupWindowsSystem32con_12542/windows_system32_config_system_file_missing.jpg
Sorry i Can't Write in arabic
To fix registry errors, you need Windows XP Recovery Console. You can start from a Windows XP CD or boot directly to the Recovery Console.
Follow these steps to boot into Windows XP Recovery Console
Put your Windows XP CD-ROM drive
Restart your computer, make sure that your BIOS is set to boot from CD
When you see the "Press any key to boot from CD ..." press the space bar or any key.
Wait until you see the "Welcome to Setup" screen, press R to start the Recovery Console
Choose the Windows installation that you want to load
Enter password and press Enter
You should now be at C: \ Windows> prompt
Repair Copy files via Recovery Console
If your Windows installation is on another drive you replace the drive letter in the procedure below.
At the Recovery Console command prompt, type the following lines and press ENTER after each line:
md tmp
copy c: \ Windows \ system32 \ config \ system c: \ windows \ tmp \ system.bak
copy c: \ Windows \ system32 \ config \ software c: \ windows \ tmp \ software.bak
copy c: \ Windows \ system32 \ config \ sam c: \ windows \ tmp \ sam.bak
copy c: \ Windows \ system32 \ config \ security c: \ windows \ tmp \ security.bak
copy c: \ Windows \ system32 \ config \ default c: \ windows \ tmp \ default.bak
delete the C: \ Windows \ system32 \ config \ system
delete the C: \ Windows \ system32 \ config \ software
delete the C: \ Windows \ system32 \ config \ Sam
delete the C: \ Windows \ system32 \ config \ security
delete the C: \ Windows \ system32 \ config \ default
copy c: \ windows \ repair \ system c: \ Windows \ system32 \ config \ system
copy c: \ windows \ repair \ software c: \ Windows \ system32 \ config \ software
copy c: \ windows \ repair \ Sam C: \ Windows \ system32 \ config \ Sam
copy c: \ windows \ repair \ security c: \ Windows \ system32 \ config \ security
copy c: \ windows \ repair \ default c: \ Windows \ system32 \ config \ default
Quit Recovery Console by typing "exit." When the computer restarts, press F8 and then select Safe Mode
adiloh
16-06-2011, 12:00 AM
Restart in Safe Mode and a Recent Snapshot Backup
Restart the computer in Safe Mode by pressing F8 during the initial bootup and select Safe Mode. Once in Safe Mode, make sure the files and folders are visible so you can access them. Follow these instructions to achieve this.
Open My Computer
Click the Tools menu and then click Folder Options.
Click the View tab.
Under Hidden files and folders, click to select Show hidden files and folders, and then click to clear the Hide protected operating system files (Recommended) check box.
Click Yes when the dialog box that confirms that you want to display these files appears.
In My Computer, double-click the drive where you installed Windows XP (usually drive C) to view a list of folders. Then double-click "System Volume Information" folder. This folder contains the system restore points stored on your computer. The folders are similar
_restore (EE42BEB8-700A-495F-8004-53D26C2E12C5)
You may receive an Access Denied error message when trying to access the System Volume Information folder.
C: \ System Volume Information is not available. Access is denied.
You received this error message because you are logged into folder that does not have permissions set on the folder. To correct this, please follow the instructions in Microsoft Knowledge Base article 309531 to access and continue.
Once you have access to snapshots, use the following instructions to copy one of the latest snapshots for Windows \ TMP folder, so you have access to it.
The System Volume Information folder, click View, then click Details to display the date of each snapshot folder.
Open a folder that was created at the current time, but rather before the problem began.
Open Snapshot subfolder
Check the following files and copy and paste them into C: \ Windows \ TMP folder
_REGISTRY_USER_.DEFAULT
_REGISTRY_MACHINE_SECURITY
_REGISTRY_MACHINE_SOFTWARE
_REGISTRY_MACHINE_SYSTEM
_REGISTRY_MACHINE_SAM
Rename the files that you just copied into the C: \ Windows \ TMP folder.
Rename _REGISTRY_USER_.DEFAULT to DEFAULT
Rename _REGISTRY_MACHINE_SECURITY for security
Rename _REGISTRY_MACHINE_SOFTWARE software
Rename _REGISTRY_MACHINE_SYSTEM for system
Rename _REGISTRY_MACHINE_SAM to SAM
When your done rename files, restart your computer again with the Recovery Console
adiloh
16-06-2011, 12:00 AM
Replace Repair files with a current backup of the Registry
In the Recovery Console again, type the following commands at the prompt to replace the files with a current backup. You must press ENTER after each command.
Part c: \ Windows \ system32 \ config \ Sam
Part C: \ Windows \ system32 \ config \ security
Part C: \ Windows \ system32 \ config \ software
Part C: \ Windows \ system32 \ config \ default
Part C: \ Windows \ system32 \ config \ system
copy c: \ windows \ tmp \ software c: \ Windows \ system32 \ config \ software
copy c: \ windows \ tmp \ system c: \ Windows \ system32 \ config \ system
copy c: \ windows \ tmp \ Sam C: \ Windows \ system32 \ config \ Sam
copy c: \ windows \ tmp \ security c: \ Windows \ system32 \ config \ security
copy c: \ windows \ tmp \ default c: \ Windows \ system32 \ config \ default
Once the files have been changed, type exit at the command prompt to restart Windows in Normal mode.
magic8black
21-06-2011, 05:30 AM
بص يا غالى لو عندك فيرس او اى عيب ف الجهاز نزل البرنامج ده Malwarebytes' Anti-Malware واعملة ابدبت بس اسف انى مش عملتك شرح ليه بس والله الصور مش راضية تشتغل مش عاف ايه السبب المهم حدثة اعمل اسكان اختار تانى واحد ف الاسكان تمام ومش اقولك بقيت الشرح ازاى بس شوف شرح ليه على النت اكيد هتلاقى ان شاء الله واسف على عدم المساعدة
f_h_u
22-06-2011, 06:11 AM
بيقولك الويندوز مش هيقدر يكمل الفتح عشان فى ملف ناقص او موجود لكن فيه مشكلة
وده لازم تسطب نسخة تانية
وادام انت بتقول سطبت 11 نسخة ونفس المشكلة
فا ده كده حاجة من الاثنين
1- فيرس متخصص فى افساد الملف ده وطبعا لازم يتشال بانتى فيرس من دول
avira - avast - panda- nod32
وطبعا لازم يكون معمول ليهم تحديث بتاريخ اليوم
ودول افضل انواع بالعالم
يا اما العيب الثانى
2- فى برنامج عندك انت بتسطبه ومن خواص البرنامج انه بيستخدم الملف system عند تسطيب البرنامج .. والبرنامج بايظ فا اما بيحتاج ملف ال system بيبوظه هو كمان معاه فا الويندوز بيخرب
والحل هو انك ماتسطبش البرامج اللى كنت بتسطبها بعد كل ويندوز ونزل الحديث منها من النت من جديد وجرب
وان شاء الله تتحل
سلامووز
انا شايف ان هو بيكلمة صح وتمام +2
Mishary Alafasy
24-06-2011, 05:12 AM
Thank you,bro, adiloh
Bot-KingDom
30-06-2011, 07:43 PM
نزل نسخة يا باشا
DARK_FALCON
06-07-2011, 07:15 AM
بيقولك الويندوز مش هيقدر يكمل الفتح عشان فى ملف ناقص او موجود لكن فيه مشكلة
وده لازم تسطب نسخة تانية
وادام انت بتقول سطبت 11 نسخة ونفس المشكلة
فا ده كده حاجة من الاثنين
1- فيرس متخصص فى افساد الملف ده وطبعا لازم يتشال بانتى فيرس من دول
avira - avast - panda- nod32
وطبعا لازم يكون معمول ليهم تحديث بتاريخ اليوم
ودول افضل انواع بالعالم
يا اما العيب الثانى
2- فى برنامج عندك انت بتسطبه ومن خواص البرنامج انه بيستخدم الملف system عند تسطيب البرنامج .. والبرنامج بايظ فا اما بيحتاج ملف ال system بيبوظه هو كمان معاه فا الويندوز بيخرب
والحل هو انك ماتسطبش البرامج اللى كنت بتسطبها بعد كل ويندوز ونزل الحديث منها من النت من جديد وجرب
وان شاء الله تتحل
سلامووز
الكاسبر الافضل على الاطلاق
أما بلنسبة ل الموضوع بتاع السيستم فايل فـاحب اقولك ده فيروس وحاله مش في انتي فيروس
حاله حاجة تانية الفيروس ده لو زي ماحضرتك بتقول يبقى ركز معايا شوية
لو محتاج الملفات العلى جهازك يبقى تعمل فورمات لل C وبعدين اوعى تفتح بقيت البارتيشنس
لانه دخل على هزات أتوا رن
من الآخر هناك حلين
1 إنك تعمل فلل فورمات للهارد كله ولو في هارد تاني شيله تماما دلوقتي
2 إنك تعمل فورمات للc بس وبعدين
متفتحش أي بارتيتين إلى بعد تحميل أي انتي فيروس مش حتفرق بس لازم تعمله أبدت
وانصحك بالافيرا ده فري ومش وحش وبعد ماتنزله تعمل فلل سكان ولو لأ ورم اعمل سكان مرة واتنين وتلاتة
ومتفتحش أي بارتيشون إلى بعد التأكد من نظافة الهارد تماما
!! Prince World !!
06-07-2011, 09:26 PM
حاجة ناقصة ف الملف الويندوز
silkroad2
10-07-2011, 03:28 PM
شكرااااااااااااااااااااااااااااااااااااااااااااااا اااااااااااااااااااااااااااااااااااااااااااااااااا ااااااااااااااااااااااااااااااااااااااااااا
vBulletin® v3.8.11, Copyright ©2000-2026, vBulletin Solutions, Inc